If you have heard the clear long beep from your ESC, but the motor is not spinning after manipulating the throttle, follow the instructions in this guideline:
- Make sure that the input voltage to the ESC corresponds to the working voltage of your motor.
- Check the three phase wires if they are properly connected.
- Check if your motor can be paired with the ESC.
- If necessary, use an oscilloscope to check if the PWM signal was received properly from the circuit.
- Under most circumstances, we could not provide much technical support regarding a specific pairing of the ESC and motor. Please understand that we are unable to test all the ESCs in the current market.