Flight Stand 150 Datasheet
Flight Stand 150 User Manual
Force Measurement Unit Quick Installation Guide
Electrical Measurement Unit Quick Installation Guide
Stand Structure Quick Installation Guide
Before the Installation
The test environment should be design such that even in the event of a catastrophic failure of the motor, propeller, ESC, tool, or ground fixture, no operator or bystander is harmed. Use physical barriers. Safety first!
- Hand tightened the M8 connector for the Force Measurement Unit firmly. A loose connector can lead to disconnections during a test.
- Use lock-tight and a torque wrench on all screws, including on your own equipment if possible. Vibrations can lead to loose screws and rapid unintended disassembly.
Download and instructions are here.
Watch tutorials on how to use the software here.