Back to BlogSeries 1780 Thrust Stand Manual
Series 1780 Thrust Stand Datasheet
How to Build the Series 1780 + Run Propulsion Tests - Video
Before the Installation
Please make sure that the motors and propellers that are going to be tested are within the official specifications of the tool as detailed in the datasheet. You can also check the dimensions of the universal motor mount and the general dimensions of the tool.
Assembly
Assemble the device and install your motor and ESC as explained in the manual.
Software Installation
Install the software and connect the tool to the computer. Don’t forget to run the calibration utility in the setup tab! Your operating system should install the drivers automatically. If you are having problems, please check our article about driver installation.
If you want to automate tests for repeatability and reduce testing time, you can modify the included scripts and use the API documentation (see the software for details). We have video tutorials explaining how to use the software and how to use scripts on the software download page.
