The NEW Flight Stand has arrived! Check out our newest test stand:

Click Here

This section doesn’t currently include any content. Add content to this section using the sidebar.

Image caption appears here

Add your deal, information or promotional text

This section doesn’t currently include any content. Add content to this section using the sidebar.

Image caption appears here

Add your deal, information or promotional text

Flight Stand 15/50 Datasheets and Manuals

Datasheets

Flight Stand 15 Datasheet

Flight Stand 50 Datasheet

Flight Stand 150 Datasheet (preview)

Manuals

Flight Stand 15/50 Installation User Manual

Flight Stand 15/50 Safety Instructions Manual

Flight Stand 15/50 Coaxial Kit Manual

Before the Installation

The test environment should be design such that even in the event of a catastrophic failure of the motor, propeller, ESC, tool, or ground fixture, no operator or bystander is harmed. Use physical barriers. Safety first!

Assembly

Important notes:

  • Hand tightened the M8 connector for the Force Measurement Unit firmly. A loose connector can lead to disconnections during a test.
  • Use lock-tight and a torque wrench on all screws, including on your own equipment if possible. Vibrations can lead to loose screws and rapid unintended disassembly.

 Software

Download and instructions are here.

Search